How to Calculate Complex Numbers on a Scientific Calculator

Press MODE 2 for CMPLX mode and type i with ALPHA ENG. After you press =, the display shows the real part with an R↔I indicator, and SHIFT = switches to the imaginary part. For (3 + 4i)(1 − 2i) the calculator shows 11, then −2 after SHIFT =, so the answer is 11 − 2i.

Multiply (3 + 4i)(1 − 2i)MODE2(3+4ALPHAENG)(1−2ALPHAENG)=SHIFT=

Try it on the calculator. Press the keys yourself, or watch an example being keyed in:

SC-991SCIENTIFIC · 2-LINE DISPLAY
Reference coverTap an entry to insert it
Mode initializationSHIFTMODE2=
Full reset (all)SHIFTMODE3=
ContrastMODE×6 2 ◀▶

Scientific constants CONST 01–40

Unit conversions SHIFT CONST 01–40

Constants are CODATA 2002 values.
Keyboard: 0-9 . + - * / ^ ( ) , Enter Backspace Esc, arrows. S sin, C cos, T tan, L log, N ln, R root, P pi. In BASE mode a-f type hex digits. Shift+F flips the cover.

Step by step

  1. Switch to CMPLX mode

    MODE2

    Press MODE, then 2 for CMPLX. A CMPLX indicator appears at the top of the display. Complex results only work in this mode.

  2. Type i with ALPHA ENG

    ALPHAENG

    The ENG key has a small pink i above it. Press ALPHA and then ENG to type i. To enter 3 + 4i, press 3 + 4 ALPHA ENG.

  3. Build the expression with brackets

    (3+4ALPHAENG)(1−2ALPHAENG)

    Use brackets around each complex number. Plus, minus, times and divide work as usual. Two bracketed numbers next to each other are multiplied.

  4. Press = for the real part

    =

    The display shows the real part of the answer, 11, and an R↔I indicator. That indicator means there is also an imaginary part.

  5. Press SHIFT = for the imaginary part

    SHIFT=

    SHIFT = switches to the imaginary part. An i indicator shows and the display reads −2. So (3 + 4i)(1 − 2i) = 11 − 2i.

Absolute value, argument and conjugate

Three functions sit on shifted keys, and each takes an opening bracket. Close the bracket with ) before pressing =.

SHIFT)Abs(

SHIFT ) types Abs( for the modulus, SHIFT ( types arg( for the argument and SHIFT , types Conjg( for the conjugate. For 3 + 4i, Abs gives 5 and arg gives 53.13010235. The angle uses the unit shown at the top of the display (DEG, RAD or GRA).

Find the absolute value (modulus) of 3 + 4i.Result: Abs(3+4i) = 5

Converting to polar form

Enter the number and press =, then press SHIFT +. The display shows r = 5 with an R↔I indicator. Press SHIFT = to see the angle, 53.13010235, with a ∠ indicator. To go back to the a + bi form, press SHIFT −.

SHIFT+SHIFT=
Write 3 + 4i in polar form.Result: r = 5 (press SHIFT = for the angle 53.13010235)

Entering a number in polar form

Type the modulus, press SHIFT and the (–) key to get ∠, then type the angle. 2 SHIFT (–) 45 = enters 2∠45 and shows a real part of 1.414213562. Press SHIFT = and the imaginary part is also 1.414213562.

2SHIFT(–)45=

Leaving CMPLX mode

Press MODE then 1 to go back to COMP mode for ordinary calculations.

Common mistakes and errors

i will not type
ALPHA ENG only types i in CMPLX mode. Press MODE 2 first and check for the CMPLX indicator.
Only the real part is showing
That is normal. When the R↔I indicator is on, press SHIFT = to see the imaginary part. Press SHIFT = again to return to the real part.
Wrong answer from missing brackets
3 + 4i ÷ 1 − 2i is not the same as (3 + 4i) ÷ (1 − 2i). Put each complex number in brackets before dividing or multiplying.
Angle in the wrong unit
arg( and polar angles use the angle unit shown at the top of the display. Check whether it says DEG or RAD before reading the angle.

Frequently asked questions

How do I enter i on a scientific calculator?

Switch to CMPLX mode with MODE 2, then press ALPHA followed by ENG. The display shows i.

What is i times i?

In CMPLX mode, i × i gives −1.

How do I solve a quadratic with complex roots?

EQN mode shows complex roots directly, with an R↔I indicator and SHIFT = for the imaginary part. See the quadratic equation guide for the steps.

Related guides

Solve a quadratic equationEQN mode: real, repeated and complex roots.Standard deviation and linear regressionSD and REG modes: mean, standard deviation, slope, intercept and r.